Filament rack storage

Fast print (2h) and only 144gr for the complete rack. You just need 2 wooden sticks with a cross section of maximum 25mm / 1 inch. Mine are 70cm / 27,55 inch in lenght. If you dont like the honeycomb pattern, just change the infill or add top and bottom layers. Holes are for M4 screws and tapered. I recommend to use PLA-CF filament, but it should work fine with normal PLA as well. If you are in doubt, just increase the number of walls or infill. With a lenght of 70cm / 27,55 inch you can fit ~10 spools of filament. So its only 11kg / 24 lbs of weight. But you can fit longer sticks without problems, the part itself, due to design, can carry a lot more weight. I secured my sticks with doublesided tape. If you're not using a 25mm / 0,984 inch stick, you have to rescale the "rack stopper"