Thingiverse
Filament Roll Stand
door Uija
16
Downloads
10
Likes
0
Makes
As my UP Plus 2 comes with thinner Rolls, I had to build something new. I decided to build a holder, that stands external and is build with something I have in my hobby room.
Needs 12mm rod (I use 100mm) and 10x10mm strips.
You need for each side:
2* 10x10x160mm
1* 10x10x120mm
My Strips are 9.8mm thick, so you may have to change the scad file for other sizes.
Update February 2015 - I added a "roll" with a greater diameter so the filament rolls are rotated more easily.
Needs 12mm rod (I use 100mm) and 10x10mm strips.
You need for each side:
2* 10x10x160mm
1* 10x10x120mm
My Strips are 9.8mm thick, so you may have to change the scad file for other sizes.
Update February 2015 - I added a "roll" with a greater diameter so the filament rolls are rotated more easily.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!