Filament samples (with rack)

I tried a lot of filament sample systems, but no one was perfect for me. So I create my own one. Additional there is a rack to store/display the samples.

My goal was to create a sample with different thickness fields (to check the transparency) and without any curves or holes for smooth prints and space for labels.

One sample is 54x42x2mm. Thickness fields are 10x10mm and from 0.2mm to 2.0mm in 0.2mm steps. Works best with a 0.4 nozzle and 0.2 layers.

I suggest to print the samples with the following settings in Cura 3. (If you use another slicer find a similar setting). Some settings are hidden by default in Cura and have to be enable first. (Some are defaults, but I write it down if you like to check it)

Layer Height: 0.2
Initial Layer Height: 0.2
Wall Line Count: 2
Top Layer: 999
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Z-Seam Alignment: Sharpest Corner
Top/Bottom Speed & Wall Speed: 30mm/s (depends on the quality of your printer, I suggest