Filament Side Guide with Y-Splitter

Because of my setup, I needed a suitable filament side guide. Since I didn’t want to constantly switch between the AMS and an external spool, I also needed a Y-splitter for both inputs. I had already printed the spoolroller and side spool arm from suit, and I really liked their models. So, I combined their y-splitter and filament guide into one design.I added two spacers for P1P models without an enclosure.Printing TipsUse supportsExtra Items4x PC4-M10 PTFE-Tube Connectorsa few cm's of PTFE-Tube2 x Original PTFE-Tube Guide screws1x M3x12AssemblyUse a wrench to gently tighten the PTFE connectors into the threaded holesCut a few centimeters of PTFE-Tube and attach it between the two connectors on the top side (see Picture for reference)I recommend to use an M3 tap to prepare the hole on the side of the frame for the screw.Use the two original black PTFE guide screws along with an M3x12 screw to secure the guide to the frameI recommend testing both holes a few t