Filament spool clip

Spolklämma filament clip is easy to use and works with any spool since it does not attach to the spool itself. Leave a comment if you have ideas for improving this design. The design is optimized for printing with a 0.4 mm nozzle. I print these clips at 0.20 mm layer height with at three perimeter walls. Two walls would also be fine. Take care with overhang performance. The tall handle cantilevers at nearly 30 degrees, so proper cooling and clean extrusion will give the best results. demo video: https://teknoel.com/resources/print/spolklamma Boost MeYour boost keeps new teknoel designs coming! INSTRUCTIONSInsert the filament into the innermost slot.Wrap the filament around the spool once.Insert the filament into the outermost slot.Slide the clip along the filament to tighten.