Filament Spool holder

The PERFECT filament spool holderThis spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps the bearings in place and aligned and the shape of the rollers helps to center the spoolholder during motion.PrintsettingsI prefer to make the spoolholder a bit more beefy and heavy to make sure it holds up and stays in place.Layerhight: 0.2 mmPerimeters: 5Top: 5Bottom 5Infill: 40% GyroidNeeded for complete spoolholder4x “part 1” i.e the sides4x “part 2” i.e the rollers4x 608 ball bearings4x M3x15 Screws4x M3 NutsAssemblyWhen all the parts are printed you are ready to assemble.Start by pressing the bearing into the rollers. The rollers are designed with an edge on one side to keep the bearing in place and centered.Slide the bearing on to the “peg” on each of the sides.While holding the two sides together, insert the nuts as far into the hexagonal hole a