Thingiverse

Filament spool holder

by EVXAB

5 Downloads

2 Likes

0 Makes

English

EVXAB.COM® "Filament spool holder" fits filament rolls up to 90 mm. The ball bearing rollers helps the filament to unroll without resistance. The filament roll can move to the right and left during use but is supported by side pieces so it cannot tip over or fall off.

The supplied thin tube is optional but recommended to get a free movement of the filament spool. Small defects in the printed pipe can otherwise cause occasional locking.

Note:
EVX_Spool_Holder_Skin.stl should be printed in vase mode.

Accessories needed to complete the build:

4 pcs ball bearing (ABEC7, 608ZZ)
4 pcs M3 square nut
4 pcs M3 screw (Torx T10)
4 pcs rubber feet

Accessories kit:
https://q.evxab.com/DCX1

In a hurry? Buy a ready to use version:
https://q.evxab.com/jMSE

Swedish

EVXAB.COM® "Hållare för filamentrulle" passar filamentrullar upp till 90 mm. De lagerupphängda rullarna medför avrullning av filamentet utan motstånd. Filamentrullen kan röra sig till höger och vänste

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Polycarbonate

Min. bed size

200 mm (Large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

EVXAB also publishes on

2 additional models across 1 more platforms

Printables

2 models

♥ 35 ↓ 316 ⚒ 1

Frequently Asked Questions

Which 3D printer is suitable for Filament spool holder?

Any FDM printer should handle Filament spool holder just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Filament spool holder need supports when printing?

No supports needed for Filament spool holder — it's designed to print clean off the bed.

What file format is Filament spool holder available in?

Filament spool holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Filament spool holder free to download?

Yes, Filament spool holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Filament spool holder

Similar Models

Add to Collection