Filament Spool Roll

A simple spool roll which fits at the Creality CR-10 V2 or can used stand-alone with the ground plate.

For spools with outer diametere 200mm

You must print 4 parts of "Spool_Holder_608"

Additional you need 4x 608ZZ bearings (8x22x7mm)

Simple pressfit or mount with a drop of glue

10.11.2020 - I had a little size-problem...
The inner width was 129mm instead of 126mm, so it works with the ground plate but was to loose for the "on top mount". I corrected this now