Filament spool shelf bracket

Filament spool shelvesWall-mounted filament spool shelves. They use spaced wooden dowels to hold the filament and are screwed in to the wall at equal spacings to evenly distribute the weight of your spools. Bill of materialsWooden rod / wooden dowel, either 18mm or 20mm in diameterMounting hardware to mount to your wallIf you have drywall / plasterboard you will need specific mounting hardware for this - I used M3 “molly bolts”.I'd reccomend at least one of your brackets is placed on a stud, in which case a normal screw should be usedNo specific length are given as it may vary depending on your setup, you are able to drill out the holes slightly if a larger diameter screw or bolt is requiredSmall screws to screw through the bracket in to the dowel, this stops them spinning around Reccomended print settings:Layer Height: 0.2mmInfill percentage: 20%Infill pattern: GyroidPrint orientation: Print flat againt the build surfaceOther notesThis can be used in combination with the original