Thingiverse
Filament Spool Stand
von kenaroh
3
Downloads
11
Likes
0
Makes
Stackable supports to create a rack for storing your filament spools in a minimum of space.
Bracket B serves as a stand, and you can stack brackets A up to 4 high.
Each level requires 2 cylindrical bars in aluminium, for example (lighter than steel), with a diameter of 10 mm and a length of 500 mm. These bars are generally sold in 1 m lengths, and simply need to be cut in the middle. You'll also need 2 x 500 mm bars for the base (see photos).
PLA printing, triple walls and 20% cubic filling
Supports required for centering pins
Prints made on an Elegoo Neptune 3 Pro, which allows 225 x 225 mm, support B has been rotated 45° to fit on the tray.
There's no need to glue the parts, which fit together.
Bracket B serves as a stand, and you can stack brackets A up to 4 high.
Each level requires 2 cylindrical bars in aluminium, for example (lighter than steel), with a diameter of 10 mm and a length of 500 mm. These bars are generally sold in 1 m lengths, and simply need to be cut in the middle. You'll also need 2 x 500 mm bars for the base (see photos).
PLA printing, triple walls and 20% cubic filling
Supports required for centering pins
Prints made on an Elegoo Neptune 3 Pro, which allows 225 x 225 mm, support B has been rotated 45° to fit on the tray.
There's no need to glue the parts, which fit together.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!