耗材收纳展示架|Filament Storage and Display Rack

耗材收纳展示架 我重新设计了这款耗材收纳展示架，兼容打印尺寸 330×330mm 或以上的大多数 FDM 打印机。 适配市面上常见的 60cm 宽度货架。横杆使用外径 20mm、壁厚 2mm 的 PVC 水管。单段跨度建议不超过 50cm（配图里就是 50cm 跨度，已经比较极限了），推荐适当缩短跨度，多打印几个连接件拼接在一起，整体会更稳固。 结构支持无限延长，按需要自由组合就行。 安装完全不需要五金件或胶水。卡扣设计得偏紧，是为了保证稳固，徒手不好装的话，用锤子或其它东西轻轻敲进去就可以。 如果觉得好用，欢迎点赞助力，感谢。 Filament Storage Display Rack This redesigned Filament Storage Display Rack prints perfectly on the A2L and is also compatible with most FDM printers with a build volume of 330×330mm or larger. It fits commonly available 60cm-wide shelves. The crossbars use PVC pipes with a 20mm outer diameter and 2mm wall thickness. A single span should not exceed 50cm (the photo shows a 50cm span, which is near the practical limit). For better stability, it's recommended to shorten the span and join multiple printed connectors. The design supports infinite extension — just combine as many as you need. No hardware or glue is needed. The snap-fit connections are intentionally tight for sturdiness. If hand assembly feels difficult, gently tap them into place with a hammer or similar tool. If you find it useful, a like or boost would be appreciated. Thank you.