Thingiverse
Filament storage rack
von MBX_Teknik
33
Downloads
28
Likes
0
Makes
This is a printable bracket for a V-shaped rack, suitable for storing filament to your printer.
Print at least two copies and screw two planks in the V-shaped area of the brackets.
The print measures about 187x184 mm, so it requires a printer with at least 200x200mm printing area in X and Y directions.
I printed mine in PLA with 0.3mm layer height and 20% honeycomb infill, and the shelfs seems to be capable of holding at least 10 rolls of about 1kg each without breaking.
Suitable width of the boards is about 75mm.
Happy printing!
/NOMB
Print at least two copies and screw two planks in the V-shaped area of the brackets.
The print measures about 187x184 mm, so it requires a printer with at least 200x200mm printing area in X and Y directions.
I printed mine in PLA with 0.3mm layer height and 20% honeycomb infill, and the shelfs seems to be capable of holding at least 10 rolls of about 1kg each without breaking.
Suitable width of the boards is about 75mm.
Happy printing!
/NOMB
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!