Thingiverse
File Holder
por AimlessDrifter
20
Descargas
20
Likes
0
Makes
This is designed to mount to a wall or the side of the shelf. With 2 of these spaced apart, there is space for 3 file folders. The holes are Approx. 8 mm diameter (1/4"), and the top 2 are spaced at 25 mm (approx. 1"). I've also added holes on the prongs to make it easer to screw into a wall.
This was designed using Design Spark Mechanical, and so I've uploaded the RSDoc file as well, for easier re-mixing (eg - change angle to hold thicker files, change spacing of holes, add a 4th file holder, etc - whatever will work)
Printed with Anet A8 - may require some rotation to fit, depending on bed size.
No supports required, and minimal infill should be fine.
each piece when mounted measures approx. 226 mm high, and approx. 73 mm from the wall to the furthest support.
Currently, I have 4 pieces mounted to the side of a metal shelf on my desk at work, which allows me to hold 6 folders, and i've found it to be extremely convenient.
Enjoy!
This was designed using Design Spark Mechanical, and so I've uploaded the RSDoc file as well, for easier re-mixing (eg - change angle to hold thicker files, change spacing of holes, add a 4th file holder, etc - whatever will work)
Printed with Anet A8 - may require some rotation to fit, depending on bed size.
No supports required, and minimal infill should be fine.
each piece when mounted measures approx. 226 mm high, and approx. 73 mm from the wall to the furthest support.
Currently, I have 4 pieces mounted to the side of a metal shelf on my desk at work, which allows me to hold 6 folders, and i've found it to be extremely convenient.
Enjoy!
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
