Thingiverse
FilletEdge5-11
di bbinnard
1
Download
1
Likes
0
Makes
I made this large bowl to verify that my printer, which I just converted from Marlin to Klipper, would successfully finish a long-running print. It did - this STL printed in just over 29 hours using a print speed of 100 mm/sec and a layer height of 0.200 mm.
Note that I opted to use the "fuzzy skin" option for this print. That's why the flat surfaces on the outside are not flat. I did this to hide any trace of a seam on the outside, and the fizzy skin option does this quite well. Of course that's an option you can use or not use when you create the GCode file.
I made this STL by combining parts from previous designs. This was the quickest way to get a really large STL - it took only 20 minutes or so to complete the design. It should scale down fine to smaller sizes for people who have smaller printers or just don't want to print something this large.
Note that I opted to use the "fuzzy skin" option for this print. That's why the flat surfaces on the outside are not flat. I did this to hide any trace of a seam on the outside, and the fizzy skin option does this quite well. Of course that's an option you can use or not use when you create the GCode file.
I made this STL by combining parts from previous designs. This was the quickest way to get a really large STL - it took only 20 minutes or so to complete the design. It should scale down fine to smaller sizes for people who have smaller printers or just don't want to print something this large.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
