Final Fantasy 7 - Hueforge

Hueforge of the cover art of Final Fantasy 7 original. Comes in two plates.Plate 1 : arms and head are on topPlate 2 : background is on top Pick your favorite :) Plate1:Project: ff78.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 100x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.2mm and the Actual Depth is 1.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA BambuLab Basic Green Transmission Distance: 2 PLA PolyLite Green Transmission Distance: 1 PLA PolyLite Stone Blue Transmission Distance: 0.1 PLA BambuLab Matte Ice Blue Transmission Distance: 1.9 PLA BambuLab Matte Ivory White Transmission Distance: 3.4 PLA BambuLab Basic Orange Transmission Distance: 5.4 PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.1This print uses 8 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.52mm) swap to Green At layer #12 (0.6mm) swap to Green At