Fingerboard Extendable Display for Tech Decks

This model was created to display Tech Deck fingerboards in a vertical orientation. The gap that holds the board is 4mm and is angled back 22 degrees, which works for the common shape fingerboards shown in the photos. The end caps print separately, and can be printed in a contrasting color. The main body fits into a 2mm deep cutout in the end caps, and can be glued in place if you want. The main body STL is a solid shape and is shelled out using slicer settings, so it has 3 walls, 4 bottoms, 0 tops, and 0 infill. You could fill the body with sand and then glue the end caps on for a more substantial weighted feel. You could also leave one end open and use the empty cavity as a secret stash compartment. The print profile includes 4 versions of the main body at different lengths, but you can also scale the part yourself in only the Z axis for a custom length. Just make sure to provide an extra 4mm to seat into the end caps. Print quality may go down some if you print it very tall, so use