Fire Hydrant Sprinkler / Sprayer

Fire Hydrant Hose Sprinkler Great Yard Sprinkler for playing & cooling off in the hot summer time!Print in either Yellow or Red! So my initial base was a little short as seen in the pictures. I made the final uploaded version much taller.I also wanted the nozzle at the top to spin as water went through it. However, my idea to add an impeller only worked at low water pressure from the hose 😒 The nozzle still sprayed plenty of water to play in though! So I am releasing the Hydrant for all to enjoy. All of the HEX Head bolts are on the 3rd plate to print out, but I would recommend you buy some and use them instead as the threads don't always print that well. You will need:6 x M4 16mm HEX HEAD (For show)6 x M4 30mm HEX HEAD (To hold the Hydrant to the base)12 x M4 Nuts You will also need TWO Additional bolts for the sprinkler valve: 1x M4 PAN Head 15mm1x M4 CAP Head 15mm Assembly Instructions:The order in which the Hydrant is assembled is important!First the Nozzle Assembly should be