Fire Lion HueForge with Frame

The frame is included if you want to print one Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 113.61x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Bambu Labs Black Transmission Distance: 0.1 PLA Bambu Labs Red Transmission Distance: 3.4 PLA BambuLabs Matte Lemon Yellow Transmission Distance: 3.6 PLA Bambu Labs Jade White Transmission Distance: 5.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Red At layer #12 (1.12mm) swap to Lemon Yellow At layer #16 (1.44mm) swap to Jade White for the rest.