Thingiverse
Firefly 250 FPV Racing Quad
by seabiscuit
45
Downloads
32
Likes
0
Makes
Uses M3 fasteners (apart from motor mounts).
-Includes either a monocoque base plate or separate arm pieces. If you are using the monocoque frame you will need 10mm M3 Screws, if you are using the separate pieces frame you will need ~16mm M3 screws to accommodate for the splint.
-Mounting holes for Naze32.
-I would recommend 38mm aluminium spacers
-Includes either a monocoque base plate or separate arm pieces. If you are using the monocoque frame you will need 10mm M3 Screws, if you are using the separate pieces frame you will need ~16mm M3 screws to accommodate for the splint.
-Mounting holes for Naze32.
-I would recommend 38mm aluminium spacers
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
