FireFox - HueForge Print

A fiery fox for your HueForge print needs! Using HueForge's metallic Brightness Comp to experiment with, I think I've managed to achieve a rather natural looking fire effect around the fox. The 3MF will have settings already preloaded for you. Otherwise, use the STL with the instructions below! Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used:- PLA BambuLab Matte Charcoal Transmission Distance: 0.6- PLA CC3D Orange Transmission Distance: 7.4- PLA CC3D Lemon Yellow Transmission Distance: 8- PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:- Start with Charcoal- At layer #7 (0.44mm) swap to Orange- At layer #21 (1mm) swap to Lemon Yellow- At layer #37 (1.64mm) swap to Jade White for the rest. _______________________________________If you'd like to support me, I now have a Patreon! Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise pai