FireHD 10 (2021) Tablet Stand

Since the big A no longer offers the wireless charging dock for the FireHD 10 Plus (2021), I had to make my own. The dock can also be used with the normal FireHD 10 (2021) and then charged via cable.
Optionally, the dock can also be screwed to the floor to fix it.

At 10% infill, it requires about 80-90g of filament.

The included Qi stand is suitable for an Anker PowerPort Wireless Charger wireless.

If you want to use the charging dock but use other Qi chargers, here is the data you need to build your own:

Front height: 6,429mm
Rear height: 83.751mm
Depth: 120mm
The two "centering lugs" are 20mm wide, 2mm deep and 1mm high.


Da das große A den Kabellosen Ladedock für das FireHD 10 Plus (2021) nicht mehr anbietet, musste ich mir selbst was basteln. Das Dock kann auch mit dem normalen FireHD 10 (2021) benutzt werden und dann per Kabel geladen werden.
Wahlweise kann das Dock auch an den Boden geschraubt werden um es zu fixieren.

Bei 10% Infill benötigt es etwa 80-90