Firework

Fireworks perfect as a New Year decorationPrinting parameters:material: PLAtemperature: 195°C speed; 30-35mm/s layer: 0.2mm infill: 25% supports: in one filenozzle: 0.4mmNOTE: the model should be printed slowly due to large anglesThe supports are required on the "Base Red" model, the picture below shows where Assembly instructions: you need to connect both elements "Base" and "Top Cap" screw the elements that you connected screw the “Stick” WARNING: do not tighten too much because you will break the thread for a more secure grip you can use glue put the "Fuse" in place