Fishing Rod Holder Ceiling/Wall

Description:
This fishing rod holder measures 190 × 70 × 23 mm in total (File: Ceiling_Rod_Holder_Big.stl). Detailed measurements are provided in the photo section.
Since the standard wooden rafter spacing in my area is 60 cm, I designed the part to be 190 mm long, allowing it to hold up to six rods in one compartment.
The mounting holes are 5.5 mm in diameter.
I have also included a smaller version. The outside dimensions are the same, but the hooks measure 30 × 30 mm with a 20 mm opening gap. The hooks themselves are only 5 mm thick, making this version more suitable for smaller or lighter rods.

Printing:
I recommend printing with 20% grid infill. A skirt is sufficient.

Mounting:
This holder can be mounted either on a wall (with the openings facing upward) or on the ceiling, as shown in the pictures.
When using wood screws, I recommend being cautious. Because of the angled screw heads, the print can crack around the mounting holes. To prevent this, you can use washers for reinforce