Slicer Discord
FISHINGROD HOLDER – 3D-Druckmodell von Thingiverse Thingiverse

FISHINGROD HOLDER

von John8
11 Downloads
17 Likes
0 Makes
Zum Modell
When you need to get your fishing rods up and out of the way and because space at the cottage or home is limited, the ceiling is a good location. This Thing has 3 sizes, pending the type of fishing you do. The center ring will hold a big lure if there is no rod part in it. It can be mounted with 1 or 2, #6 or #8 screws. You will need to print 2 and mount them to suit your rods. They can be mounted under a long shelf if the ceiling is too high. An elastic band can be used to hold rods in place. (see pic)
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
50 mm (Klein)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen