Fitbit Versa 2 Charging Stand (modified)

This started as a remix of the Fitbit Versa 2 Charging Stand by weasel342
I really liked the original design but much preferred the idea of the cable routing out of the rear of the stand. Additionally by OEM Versa 2 charge base has a dual curved bottom, which wouldn't sit well on a flat surface. I therefore created a simple OpenSCAD file to mirror the and subtract 2 cylinders (at 90°) to remove a section for the dual-curved base of my charge base. Because of the material this removed I deepened the groove for the cable outlet.
The USB cable is cable-tied in place using the 2 holes near the base of the stand
To resolved some problems, opening the clamp arms with the original design, I decided to redesign to top to provide more clearance and now the clamp arms can be opened fully. To get the clearance required I removed the up-stands on the top; I recommend using double-sided tape to secure the charger base in addition to a cable tie in the slots near the base. Finish it off with