Slicer Discord
Five Digits Combination Padlock (Recreated 6-9 Digits) Updated with 6-9 Digits. – 3D printable model from MakerWorld MakerWorld
Other Tools

Five Digits Combination Padlock (Recreated 6-9 Digits) Updated with 6-9 Digits.

716 Downloads
212 Likes
419 Makes
Go to Model
原设计完美复现了拨轮密码锁的解构,但3位数的密码强度太弱,我重新修改了5位数的密码锁,密码从216个组合升级到7776,大大增加了密码破解难度。 模型缩小到70%和80%仍然具有良好的性能,低于50%结构强度不够。 安装和原理请参考原设计作者。 还设计了6-9位数的密码锁,供娱乐。 The original design is great, I love it. But the original design of 3 digits, I think the strength is not enough, I remixed a 5 digit lock.From 216 possible combinations to 7776 possible combinations. 70% and 80% still have good performance, less than 50% may not be effective due to insufficient strength of the material. It is recommended not to use PETG when printing at a ratio of 70% or lower, and to use PLA to ensure better rigidity. Please refer to the original design author for installation and principle. At the request of a friend, I recreated 6-9 digits Combination Padlock,further increases the complexity of the password.
Category
Other Tools
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, PETG
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection