Five sided Hexagon scraper, universal and Printbed scraper

Five-Sided Hexagon Scraper — Universal / Printbed Scraper🧩 Design ConceptA compact multi-edge scraper that gives you several usable edges in one print. Ideal for removing 3D prints from the bed and equally handy as a plastic scraper/spatula for everyday tasks and DIY projects where a metal tool would be too harsh.A chamfered bottom edge (handle side) makes it easier to lift the tool off the build plate right after printing.🖨️ Printing TipsOrientation: Flat on the bed.Supports: Not required.Adhesion: PEI (smooth or textured); add a light glue stick if needed.After printing, lightly deburr the working edges for a cleaner feel.🛠️ Recommended SettingsMaterial: PETG or ABS for durability. PLA is possible, but will wear faster.First layer: 0.24 mmNext layers: 0.12 mm (smoother finish, a bit more flex) – 0.20 mm (faster print, more stiffness)Bottom layers: 5Walls / perimeters: 5Top/Bottom pattern: ConcentricPerimeter generator: Arachne walls building engine (if your slicer supports it)Optional: enable ironing on the topmost surface for a cleaner finish🧰 Use & CareWork at a low angle with gentle pressure on PEI sheets to avoid gouging.For very stubborn parts, prefer PETG/ABS and keep 5 perimeters for stiffness — or check my other uploads for a “Set of printbed scrapers and spatulas” that includes reinforced tough-edge variants.☕ Support & FollowIf you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.You can buy me a coffee simply by printing and boosting my files — nothing more 😉Most of my uploads are completely free, so I’ll be truly happy if you decide to reward my work in any way.If you’re interested in commercial use of this model, please contact me by leaving a comment.