Thingiverse
Five33 Switchback Pro bits
por xgoodvibesx
7
Descargas
7
Likes
0
Makes
Unify Tracer: Mount for a TBS Unify and Tracer antenna.
Foxeer Plain: 45 degree mount for Foxeer 1.7mm (13mm) lens
Foxeer v5: Same but with a slot for a tracer antenna
My Stick: My version of the classic stick turtle fin. A bit taller than the stock.
AXII 20 v2: 20 degree mount for an AXII v2 on an SMA mount. Angle is so the stiff part of the SMA connector doesn't press against the stack.
20x20 mount: just the right height to hold a 20x20mm ESC with gummies clear of the press nuts, with a little nut cover to prevent contact / shorting in a really hard crash. Trim out the lengthways part if you want.
30x30 is the same, for those of us who've Min Chan'd the frame.
Foxeer Plain: 45 degree mount for Foxeer 1.7mm (13mm) lens
Foxeer v5: Same but with a slot for a tracer antenna
My Stick: My version of the classic stick turtle fin. A bit taller than the stock.
AXII 20 v2: 20 degree mount for an AXII v2 on an SMA mount. Angle is so the stiff part of the SMA connector doesn't press against the stack.
20x20 mount: just the right height to hold a 20x20mm ESC with gummies clear of the press nuts, with a little nut cover to prevent contact / shorting in a really hard crash. Trim out the lengthways part if you want.
30x30 is the same, for those of us who've Min Chan'd the frame.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
