Thingiverse
Fixed Wing Plane Inclinometer
von torad
24
Downloads
14
Likes
0
Makes
Radio Control Fixed Wing Plane Models Inclinometer Angle Meter For Rc Plane.
Print:
- 1 x scale.stl (two colors)
- 1 x scale_holder.stl
- 4 x foot.stl
You need also 1.5 mm hard wire.
Use 2.5 mm screws to tighten everything, or drill the 2mm holes to 2.5 mm and use a 3mm screw. The screws should not be longer than 10mm.
Print:
- 1 x scale.stl (two colors)
- 1 x scale_holder.stl
- 4 x foot.stl
You need also 1.5 mm hard wire.
Use 2.5 mm screws to tighten everything, or drill the 2mm holes to 2.5 mm and use a 3mm screw. The screws should not be longer than 10mm.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
