flames

by whiskey_actual

34 Downloads

15 Likes

9 Makes

Download Model

HUEFORGE fire flames red black hot

Project: firePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.24mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments!!!! It appears