Flaming Phoenix - Hueforge

Project: Fenice.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:    PLA+ Sunlu Black Transmission Distance: 0.6    PLA+ Esun Red Transmission Distance: 6    PLA+ Esun Yellow Transmission Distance: 6    PLA+ Sunlu Beige Transmission Distance: 7.6 This print uses 4 unique filaments Swap Instructions:    Start with Black    At layer #6 (0.56mm) swap to Red    At layer #12 (1.04mm) swap to Yellow    At layer #18 (1.52mm) swap to Beige for the rest.