Thingiverse
Flashforge creator pro - Blower duct
door airmamaf
151
Downloads
91
Likes
0
Makes
I redesign this blower duct http://www.thingiverse.com/thing:560790 in order to fit into my flashforge creator pro.
I used this blower duct with a SUNON GB1205PHV1-8AY.GN (http://fr.farnell.com/sunon/gb1205phv1-8ay-gn/turbine-50x50x15mm-12vdc/dp/1568490).
Don't forget to print the blower wedge otherwise your blower will touch the frame of your printer at the home position.
I also made some modifications into my MakerWare configuration files :
##ReplicatorDual.json
- change the Y platform_length to something smaller (140 for me)
- replicator_start_position set it to Y61 instead of Y75
##start.gcode
- change Y72 to Y61 for the line beginning by G92
I used this blower duct with a SUNON GB1205PHV1-8AY.GN (http://fr.farnell.com/sunon/gb1205phv1-8ay-gn/turbine-50x50x15mm-12vdc/dp/1568490).
Don't forget to print the blower wedge otherwise your blower will touch the frame of your printer at the home position.
I also made some modifications into my MakerWare configuration files :
##ReplicatorDual.json
- change the Y platform_length to something smaller (140 for me)
- replicator_start_position set it to Y61 instead of Y75
##start.gcode
- change Y72 to Y61 for the line beginning by G92
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
