FlashForge Creator Pro Ultimate Tool Caddy

I did not find most of the other tool caddies available suitable for my needs so I designed my own, it has 5 holes which I use for my matching set of allen drivers (the FF Creator Pro can be completely disassembled with 3 different sizes of allen and a small flat blade driver), one of the 5 spots holds a plastic hole reamer for cleaning up or slightly enlargening holes. It also has a spot for my cutters, a dial indicator, 4 drill bits, 3 SD cards, and a spatula for removing prints. Oh, and there are also 5 hooks on the side so you can hang some stuff there as well. The tool caddy hangs on the side of a FF Creator Pro inside the handle as some of the others do.

No supports are needed if printed on a FF Creator Pro and it is about a 4 hour print depending on your settings, I used .2mm resolution with 25% infill and a print speed of about 3400 mm/s. I used Simplify3D as the slicing software.