Thingiverse
Flask for sand casting
door David22bradford
42
Downloads
28
Likes
0
Makes
3D model for a flask/ cope and drag.
Roughly 5.75"x 5.75" x 6" of volume for sand
Regular PLA works great, just keep in mind that you want to keep your cavity and sprue as far away from the edges as possible to keep from melting it.
if there is a high demand for the CAD files I will upload them, I do plan on making some match plate patterns for this as well.
the pins take 1/4 20 bolts and nuts, specifically 2 bolts and 4 nuts. 2 nuts and bolts should be embedded into the cope and the last 2 nuts should clamp the 2 halves together.
Roughly 5.75"x 5.75" x 6" of volume for sand
Regular PLA works great, just keep in mind that you want to keep your cavity and sprue as far away from the edges as possible to keep from melting it.
if there is a high demand for the CAD files I will upload them, I do plan on making some match plate patterns for this as well.
the pins take 1/4 20 bolts and nuts, specifically 2 bolts and 4 nuts. 2 nuts and bolts should be embedded into the cope and the last 2 nuts should clamp the 2 halves together.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
