Thingiverse
Flat Ear Saver Mk2
by moocowsia
3
Downloads
3
Likes
0
Makes
An updated version of my earlier Ear Saver. Designed for minimizing retractions.
Improvements over the previous version include less spiky edges, a steeper rake on the teeth, faster printing and lower material use. I've added two thicknesses as well, 0.62mm and 0.84mm for variability on the stiffness.
I've so far printed 0.62mm in PETG and it worked well. PLA isn't quite as tough, so I'd suggest trying the thicker one.
With my current settings 1x 0.62mm ear saver is 2.4g, and 2.9g for the 0.84 thickness.
Let me know if you have any feedback.
Improvements over the previous version include less spiky edges, a steeper rake on the teeth, faster printing and lower material use. I've added two thicknesses as well, 0.62mm and 0.84mm for variability on the stiffness.
I've so far printed 0.62mm in PETG and it worked well. PLA isn't quite as tough, so I'd suggest trying the thicker one.
With my current settings 1x 0.62mm ear saver is 2.4g, and 2.9g for the 0.84 thickness.
Let me know if you have any feedback.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
