Thingiverse

Flexi Rex with movable jaw

by hsiehty

205 Downloads

159 Likes

3 Makes

Flexi Rex with movable jaw. Just give it a bite!
Close the mouth, and then open it.
Repeat the above procedure until the jaw is free to move.
Jaw gaps 0.30mm(da Vinci Jr.1.0A & CR-10S) and 0.50mm(da Vinci mini w) are suggested for 100% printing.
Try test-gap things (Rex pencil top https://www.thingiverse.com/thing:3263585 or Rex keychain https://www.thingiverse.com/thing:3395707) first to ensure the acceptable jaw gap of your machine.
Larger gap can be used for smaller-scaled printing, and smaller gap can be used for larger-scaled printing.

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

hsiehty also publishes on

124 additional models across 1 more platforms

Cults3D

124 models

♥ 393 ↓ 6,175

Frequently Asked Questions

Which 3D printer is suitable for Flexi Rex with movable jaw ?

Any FDM printer should handle Flexi Rex with movable jaw just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Flexi Rex with movable jaw need supports when printing?

Nope — Flexi Rex with movable jaw is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is Flexi Rex with movable jaw available in?

Flexi Rex with movable jaw is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Flexi Rex with movable jaw free to download?

Yes, Flexi Rex with movable jaw is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Flexi Rex with movable jaw

Similar Models

Add to Collection