Flexi Triceratops

Flexi Triceratops – Print-in-Place | No Supports Bring a classic dinosaur to life with this Flexi Triceratops! This fully articulated, print-in-place model is designed to come off the build plate ready to move—no assembly required. Featuring a low-profile body with the head, belly, and tail flat to the ground, this design ensures stable printing and consistent results across a wide range of FDM printers. The segmented body allows for smooth, satisfying movement, while the iconic horns and frill give it that unmistakable triceratops look. Perfect as a fidget toy, desk display, or quick and fun print. Key Features 🦕 Print-in-place design (fully assembled after printing) 🔄 Fully articulated body and tail 🧵 No supports required 📏 Flat, stable design for reliable printing ⚡ Quick and beginner-friendly Recommended Print Settings Printer Type: FDM Nozzle: 0.4 mm Layer Height: 0.16–0.2 mm Infill: 10–15% (Gyroid or Grid) Walls: 2–3 Top/Bottom Layers: 3–4 Speed: 40–60 mm/s Supports: OFF Adhesion: Brim optional (3–5 lines if needed) Material Recommendations PLA (Best choice) → clean articulation and detail PLA+ → stronger joints PETG → works well with proper cooling ⚠️ TPU may fuse joints unless finely tuned Print Tips Avoid over-squishing the first layer to prevent fused joints Let the print fully cool before moving parts Gently flex each segment to free movement If joints feel tight, reduce flow slightly or increase layer height Scaling Designed for 100% scale Can scale down to ~80% depending on printer calibration Scaling up improves articulation and strength Orientation Print flat on the build plate (default orientation) Model is optimized for clean bridging and joint clearance Creator Note Designed for reliable, repeatable prints and smooth articulation. If you print one, feel free to upload a make—I’d love to see your color variations and setups!