Flexible segmented vacuum hose for MFT usage

by teslapunk · Other Tools

1k Downloads

658 Likes

507 Makes

This is a variation of my Flexible segmented vacuum hose 40mm (fits DN40 pipes) for ShopVac for MFT usage. Ready to fit in 19 or 20mm benchdog holes or Festool MFT rails. For the 19/20mm hole versions the bolts are slightly conical and should fit well. With 5 elements you get an angle of nearly 90°, so with 10 to 12 elements you have a wide range of flexibility. Print orientation as it comes from the STL files, for the MFT mounts enable supports! I highly recommend to print two links first and see how they fit. If too loose try increasing your flow rate, if too tight lower your flow rate. Or for both cases trying a different filament may also work. So please don't blame me if they don't fit on the first try - this is normal due to tolerances of printers and filaments! I utilized a green Bambu PETG Basic, which closely resembles Festool Green.

flexible tube vacuum dust rail dustcollection hose vacuumadapter festool dustcollector vacuumcleaner shopvac 20mm 19mm segmented benchdog exhaust flexibel mft saugschlauch