Thingiverse
FlightAware ADS-B Pi Zero W Receiver Case
von Rkimmell73
36
Downloads
29
Likes
1
Makes
R1 Initial Release
This is a FlightAware ADS-B Ground Station using a Raspberry Pi Zero W, PiAware software and an FlightAware ADS-B USB receiver.
May be mounted vertically by drilling out the two internal mounting holes.
Parts required
1 - Raspberry Pi Zero W or WH with power supply.
1 - FlightAware Pro Stick Plus ADS-B USB Receiver (with or without built in filter) + MicroSD with PiAware reloaded. (Amazon)
1 - Micro USB (male) to USB 2.0 (Female) OTG cable [Amazon](https://www.amazon.com/dp/B00YOX4JU6/ref=cm_sw_em_r_mt_dp_U_B5NHEbH8QTXD4)
1 - External ADS-B antenna - Multiple options are available on Amazon.
4 - M2.5x5 socket head screws
4 - M3x10 socket head screws
Links: [FlightAware - Build your own ADS-B Ground Station](https://flightaware.com/adsb/piaware/build).
This is a FlightAware ADS-B Ground Station using a Raspberry Pi Zero W, PiAware software and an FlightAware ADS-B USB receiver.
May be mounted vertically by drilling out the two internal mounting holes.
Parts required
1 - Raspberry Pi Zero W or WH with power supply.
1 - FlightAware Pro Stick Plus ADS-B USB Receiver (with or without built in filter) + MicroSD with PiAware reloaded. (Amazon)
1 - Micro USB (male) to USB 2.0 (Female) OTG cable [Amazon](https://www.amazon.com/dp/B00YOX4JU6/ref=cm_sw_em_r_mt_dp_U_B5NHEbH8QTXD4)
1 - External ADS-B antenna - Multiple options are available on Amazon.
4 - M2.5x5 socket head screws
4 - M3x10 socket head screws
Links: [FlightAware - Build your own ADS-B Ground Station](https://flightaware.com/adsb/piaware/build).
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
