Flipsky VX3 remote side strap attachment

Attachment pieces to mount a side strap on a Flipsky VX3 remote.
The holes in both pieces are 3.5mm so you can tap or heat tap the threads in for the M4 screws. I used an M4x16 on the top piece and M4x12 on the bottom. They will bite just enough into the VX3 housing to stay put as long as you just snug them up and don't crank down on them. 8/32 screws are also an option if you don't have any metric around. The orange strap is the wrist cuff that came with the remote, I trimmed down the ends and have sewn on a couple of velcro strips. It does float with the strap attached.