Thingiverse
Floating Plant Pot
214
Download
191
Likes
2
Makes
Hey guys I hope you like this design for a floating plant pot.
Key points:
========
> The space between the center parts should be 20mm.
> The max weight is 345g.
> The hole size is 1.4mm but when printed is goes down to 0.75 so use a string of 0.5 to 0.6mm in diameter, if you can get a multithread cord works best.
> Only use supports for the middle bits that hang the rest of the part and the channel at the bottom of the foot doesn't require support at all.
> Box needs to be printed upside down so that you don't have to do any cleaning to ensure the box and the foot fit properly.
IMPORTANT
==========
When feeding through the thread for the 8 holes on the bends of the square the whole thread needs to be in a continuous pattern, what I mean by this is that you DON'T use 4 small threads to hold the system together. if you do that you will find it really hard for obtaining the right balance when the plant is on it.
>> please see images
I have included the f3d fil
Key points:
========
> The space between the center parts should be 20mm.
> The max weight is 345g.
> The hole size is 1.4mm but when printed is goes down to 0.75 so use a string of 0.5 to 0.6mm in diameter, if you can get a multithread cord works best.
> Only use supports for the middle bits that hang the rest of the part and the channel at the bottom of the foot doesn't require support at all.
> Box needs to be printed upside down so that you don't have to do any cleaning to ensure the box and the foot fit properly.
IMPORTANT
==========
When feeding through the thread for the 8 holes on the bends of the square the whole thread needs to be in a continuous pattern, what I mean by this is that you DON'T use 4 small threads to hold the system together. if you do that you will find it really hard for obtaining the right balance when the plant is on it.
>> please see images
I have included the f3d fil
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
