Floating Tablet Kiosk Wall Mount Acustic Panel

Wall Mount for my cheap Android Tablet on my Acustic Panel with a gap size of 15 mm and a depth of approximatly 13 mm.As my panel gap size was rather irregular, i had to adjust the width of one of the hocks to 90%, the other one fit perfectly (I guess i measured only that side).Stick the hocks on the tablet with tesa powerstrips (designed for small, I only had large, I guess it works). Technically can be used to mount everything flat against an acustic panel. The wall nuts are inspired by all the twist lock nuts you find for acustic panels either here or at printables, I just designed my own because I find it easier than to figure out how to convert the 3D files of other people into CAD. There is a ~3 mm gap to the wall, as I needed room for the rear camera. I also added a third hock at the base for stability when pressing, I just didnt bother to glue it in or use a nut, it is just for the distance. As a cable I am using a flat 90° from Ali Express and for power I installed an AC to US