Floppy Eared Bunny

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Sunlu White Transmission Distance: 9 This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At l