Flora IV-6 VFD clock

This is an enclosure for my Flora IV-6 VFD clock.

It's last of my designs made in Tinkercad so you may have to slightly adjust the X and Y size in your slicer.

Choose *IV-6 VFD Main filled.stl* if you want to print the enclosure in white. I personally suggest stone white PLA from Spectrum with particles. It very nicely hides imperfections.

If you want to print it in a different color, choose *IV-6 VFD Main.stl*, this one has open holes for the dots. I suggest to print it with some darker filament that's not translucent. Print the dots with transparent PLA. I also suggest to attach a strip of white paper sticker or just glue a strip of paper on the inside, so you get a nice diffused light. You will have to shove the dots in the holes so make sure not to print them too large - they should just barely fit inside and stay in place by friction. You can further secure the dots with a dab of superglue but I wouldn't recommend that.

**Project github:**
https://github.com/mcer12/Fl