Thingiverse

Floss Dispenser

by yellowbus

12 Downloads

8 Likes

0 Makes

This is a floss dispenser designed to hold one floss handle and 14 refills. It has a built-in drainage system in case it gets wet. Recommend adding small rubber. It was modeled based on the Listerine UltraClean Flosser (formerly Reach). It may work for other brands but haven't tested any others.

No support is needed.

This is a 4 hour 17 minute print on the Prusa MINI+ (40mm nozzle, 20mm layer, 15% infill). It uses about 43 grams of filament.

Dimensions: 150mm long x 30mm wide x 68mm tall

Original design

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Floss Dispenser need supports when printing?

No supports needed for Floss Dispenser — it's designed to print clean off the bed.

How long does it take to print Floss Dispenser?

According to the design notes, Floss Dispenser takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Floss Dispenser available in?

Floss Dispenser is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Floss Dispenser free to download?

Yes, Floss Dispenser is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Floss Dispenser

Add to Collection