MakerWorld

Test Models

Flow test

by MikeProch · Test Models

2.1k Downloads

93 Likes

1.4k Makes

Turn spiral vase ON!Measure the wall thickness (x) and then calibrate your flow (%). (0.4*100)/x = your flow (%) 20x20x20 mm “cube” with one perimeter with bottom thikness 0,4 mm.

Category

Test Models

Source

MakerWorld

Published

05.01.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

20 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Flow test?

Any FDM printer should handle Flow test just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 20 mm is recommended.

Does Flow test need supports when printing?

No supports needed for Flow test — it's designed to print clean off the bed.

What file format is Flow test available in?

Flow test is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Flow test free to download?

Yes, Flow test is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Flow test

Similar Models

Add to Collection