flowery candle holder

This is a candleholder, the hueforge print has to be glued to the base of the candleholder. Project: ghirlanda bianca.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ esun pine green Transmission Distance: 0.1 PLA overture ciocolate Transmission Distance: 0.1 PLA overture white Transmission Distance: 4.4 PLA+ generic red Transmission Distance: 4.3 PLA+ xing pink Transmission Distance: 5.3 EPLA MATTE esun light blue Transmission Distance: 0.3 PLA+ esun gold Transmission Distance: 3.9This print uses 8 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to pine green At layer #8 (0.72mm) swap to ciocolate At layer #14 (1.2mm) swa