FLP-03 Flycore-Based Bullpup Blaster

This is the FLP-03, a Flycore based Nerf blaster. It uses straight Talon magazines, and is compatible with Hurricane wheels (and I believe FTW wheels, but have not tested). The battery box is approximately 30mmx30mmx100mm. You will need: to print and assemble the Flycore Straight with the magazine DETENT, not magazine release, as seen here: https://github.com/oldfieldadamg/OFD_Flycore_Straightand here: https://www.printables.com/model/286951-ofd-flycore-straight-talon-design-your-next-printeand to get your hands on 11 more M3 heat-set inserts and various sizes of M3 screws. Recommend a cheap assortment off Amazon. You'll need a 21a button microswitch (Nerf standard) and a 10a lever microswitch (same deal, if you're ordering your Flycore hardware off Outofdarts you'll be able to find them) one Nerf toy screw, and one relatively stiff trigger spring (around 5mm diameter) as well.The trigger pack I've included here screws onto the front insert of the Flycore. You'll wa