FLSUN Q5 3.5" Display

# **FLSUN Q5 3.5" Display**

## A bigger display for the FLSUN Q5



### Summary
Four brackets at the corners of the control box's display opening are screwed to the existing thread holes. The bracket's arms lead through the opening, holding a Makerbase MKS Robin TFT35 3.5" LCD display at an angle of 15 degrees for convenient operation. A snap-in casing is also included.

### Print
The brackets should be rotated appropriately to minimize support structures. To produce sturdy parts the infill rate should be at least 25 %. After printing the support material has to be removed, especially the 1.5 mm slits that should fit to the control box opening sheet might need a slight rework with a warding file.

### Assembly
The existing 2.4" LCD is removed by unscrewing four fixing screws and unplugging the ribbon cable. To gain some more space for fingers and tools, the power supply's housing might be loosened. The brackets are screwed to the original display's thread holes at the in