FLSun SR Endoscope Camera Mount

UPDATE: added a design that differs in a way it attaches to the effector plate (flsun-cam-mount-effector-with-pegs v1.stl), see below.

This is a mount to attach an endoscope camera to FLSun SuperRacer. It mounts to the effector plate and is designed for this specific camera: https://www.amazon.ca/gp/product/B07TVD38LJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It should work for similar cams that can fit in the sleeve that is sized at 5.8 mm diameter.
Since it's clamped there could be some wiggle room. If not, you will need to remix the sleeve.

For the arm that attaches to the effector plate there are two options:

1. flsun-cam-mount-effector_v9.stl - the original design that relies on 2 set bolts (M3). Not ideal as it's finicky to drive the bolts at an angle so they catch against the bolt wells on the extruder

2. flsun-cam-mount-effector-with-pegs v1.stl - no bolts on this one, instead it has two bumps that clamp against the existing bolt wells on the effector plate.